Nautilus Hyosung MX5300CE Manual Download Page 65

Page: 65 / 180

Operator Function

Nautilus Hyosung, Inc.

Surcharge Mode

►

The

SURCHARGE MODE

contains the enable/disable of the surcharge warning screen

and setting the surcharge amount and surcharge owner. When the

SURCHARGE

MODE

is disabled and also if the swiped card data contains BIN number that was

entered during installation, the surcharge warning message will not be displayed.
When the

SURCHARGE MODE

is enabled, the

SURCHARGE

OWNER, AMOUNT

and

SURCHARGE PERCENT

will be displayed in the surcharge warning screen

during transaction. The factory default is surcharge enabled, surcharge amount is
$1.50 and the surcharge owner is none.

SURCHARGE PERCENT

is to set up the percentage of surcharge.

Summary of Contents for MX5300CE









































































































































































Search results

Summary of Contents for MX5300CE

Reviews:

Related manuals for MX5300CE

Brands by name

Popular brands

Nautilus Hyosung MX5300CE, Manual

Search results

Summary of Contents for MX5300CE

Reviews:

Related manuals for MX5300CE

Brands by name

Popular brands