Operator Function
©
Nautilus Hyosung, Inc.
All Rights Reserved. 99
System Control
►
This
SYSTEM CONTROL
menu contains
SOFTWARE UPDATE, REBOOT, BACKUP
ALL JOURNAL TO USB, BACKUP JOURNAL BY DATE TO USB, BACKUP LOG TO
USB
and
CLEAR NVRAM.
Please press each button on this menu to go to next screen or to operate the related
function. And if you want to go back to the previous screen, press the
CANCEL
key.
You can back up a various kinds of journal data and log data you want in this menu.
Please make sure that USB drive is connected into USB slot before pressing the
button. When
BACKUP ALL JOURNALS TO USB, BACKUP JOURNAL BY DATE
TO USB
or
BACKUP LOG TO USB
button is selected, this data will be sent into USB
flash drive. When
SOFTWARE UPDATE
is entered, it will change to the screen of
SOFTWARE UPDATE
. This is because Software Update functionality is supported at
SYSTEM CONTROL
menu. When
SYSTEM CONTROL
is submitted the files in USB
flash drive will be copied to the ATM.
<Note!>
How to update the software, please refer to the Appendix
