Installation Manual Chapter 1 Introduction
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
1-4
Safety Precautions
Common Safety Precautions
The Safety Precautions outlined this manual provide information on safe and proper
handling of the product. Non-compliance with these safety precautions may result in
personal injury or damage to the product.
This caution symbol will be accompanied by warning terminology that points out safety
warnings during equipment handling.
Please read the following instructions before operating the equipment.
Operate equipment as outlined in this manual.
Follow the cautions indicated in this manual, as well as on the equipment itself.
Failure to properly address these precautions may lead to personal injury or
damage to the product.
Avoid operations not addressed in this manual.
If you cannot remedy a system problem using the methods outlined in this manual,
contact your NHA support personnel.
Any change or modifications to the construction of this device which is not
expressly approved of by the party responsible for compliance could void the user’s
warranty.
<Note!
>
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his expense.
CAUTION
1. To reduce the risk of fire, use only No. 26 AWG OR LARGER Telecommunication
cord
2. There is a risk of explosion if the battery is replaced with an incorrect type.
Dispose of used batteries according to the instructions.
3. For pluggable equipment, the socket-outlet shall be installed near the equipment
and shall be easily accessible.
4. The equipment is to be secured to the building structure before operation.
5. A security container shall be permitted to optionally be provided with a secondary
lock, but improper use of the secondary lock feature will reduce the security level
of the MS400A.
