![background image](http://html1.mh-extra.com/html/nautilus-hyosung/monimax7600da/monimax7600da_operators-manual_3539552067.webp)
Chapter4. Cash & Check Insert Module (CCIM) Operator Manual
4-28
©
Nautilus Hyosung, Inc.
All Rights Reserved.
How to replace Ink Head Cleaner Felt
▶
How to replace Ink Head Cleaner Felt
1. Open BM3 using BM3 Lock Lever and disassemble the felt unit step by step as
shows the picture (Dissembling the Felt Unit).
At that time, Rotate two captive screws counterclockwise completely
2. Rotate the felt adaptor as shows the picture (Replacing Ink Head Cleaner Felt), and
remove the old one by using the pin set.
3. After replacing the new one by removing the tape, assemble the felt unit in the
reverse process
Dissembling the Felt Unit
Replacing Ink Head Cleaner Felt