Operator Manual Chapter3. For the beginning operator
©
Nautilus Hyosung, Inc.
All Rights Reserved. 3-9
combination of 50-25-50.
This is an option that is only available while the lock is in Shelved Mode and is intended
only for temporary use after the ATM is deployed but before the lock is activated. It is not
recommended to keep the Cencon lock in this Shelved Mode condition, due to lack of
security and control.
Required Items:
Change Key, Current Shelved Mode Combination
<Note!>
You can only change the Shelved Mode combination while operating in Shelved Mode. Once
a lock is “activated” in any mode, the Shelved Mode combination returns to the Factory
Default of 50-25-50
To change the Shelved Mode Combination:
1. Power Lock
EC
Turn the Dial to the left (CCW) until “EC” (Enter Combination) is displayed.
2. EC
Enter Shelved Mode Combination
OPr
Enter the current Shelved Mode combination (either 50-25-50 or a changed Shelved Mode
combination) by sequentially pressing those digits on the lock keypad. The numbers will be
displayed on the LCD as they are entered. When the combination has been correctly
entered, the LCD will read
OPr
, meaning "
OP
en
r
ight."
3. OPr
Retract Bolt
Turn the Dial to the right (CW) to retract the bolt
4. Open Door
5. Insert Change Key
Insert the change key into the change key socket on the back of the lock.
WARNING:
Do not close the door.
Leave the door open during this process until your are comfortable opening the lock with
the new combination.
6. Extend Bolt
Turn the Dial to the left (CCW) to extend the bolt.
7. Power Lock
Turn the dial to the left (CCW) until
(the Change Key symbol along with Enter
Combination) is displayed.
8.
Press #8
EcF
