Installation Manual Chapter4. System Installation
© 2016
Nautilus Hyosung Inc.
All Rights Reserved
.
4-2
Bolting Down the MX5300SE
► To bolt down the MX5300SE using the Anchor Bolt Location Sheet (template), perform
the following steps:
1. Ensure that the surface where the MX5300SE is to be placed is level so that the
unit will not tip over when opening the upper/lower modules or the door.
2. Place the anchor bolt location sheet where the MX5300SE is to be installed.
3. Drill the correct diameter and depth holes at the locations marked on the sheet.
4. With the groove of the anchor bolt facing up, drive the anchors into the holes
drilled in step 3.
5. Place the MX5300SE on the bolt location sheet, matching the mounting holes of
the unit with the anchors.
6. Firmly tighten the mounting bolts in the anchors
.