Nauticam SFE2860-F, Instruction Manual

Page: 4 / 6

MOUNT THE GEAR ON A LENS
1. Insert the plastic C-ring as shown and
place it over the lens.
2 Insert the SFE2860-F Focus Gear on
the plastic C-ring until it reaches the
flange of the plastic C-ring.
3. To remove the SFE2860-F Focus Gear,
reverse the above steps.
The tightness between the SFE2860-F
Focus Gear and the lens can be
adjusted by removing or adding rubber
grips on either sides of the plastic C-
ring, spare rubber grips are included in
the package.