9
1.
After verifying that the housing main O-ring is in good condition,
lightly coat it with the lubricant provided.
2.
Make sure the O-ring groove located in the front part of the
housing is free from any foreign material; the groove can be
cleaned with the aid of a microfiber cloth.
3.
Place the main O-ring into the groove.
4.
To install the optical fibre mount for external strobe connection,
push it into the sockets in the focus light mount as shown:
Summary of Contents for NA-XZ1
Page 1: ...0...
Page 15: ...14 Diffuser Adaptor for Inon UWL H100 LD28 Wet mate dome port...
Page 17: ...16...
