9
PREPARATION FOR USE
Installing the Camera - housing tray attachment
1
4
2
3
unlock camera tray lever and
remove the tray from the housing
lock camera tray
*
gently push the Drive lever &
Still/movie mode lever downwards
and make sure they are engaged
with the lever on the camera
*
place the zoom/focus knob in
place and make sure it is engaged
with lens gear
attach the camera tray by tightening
the tray screw into the tripod socket
of the camera
* drawings as illustrations only
*
lift up the Drive lever & Still/movie
mode lever each time before installing
the camera
*
pull out the zoom/focus knob if
installing the camera with lens and
gear attached
*
please refer to page 10 for lens
installment before sliding in the camera
slide the camera tray back into the
housing along the tray rail
