3
IMPORTANT INSTRUCTIONS
A water-tight/vacuum test without the
camera inside the housing is highly
recommended when using the system for
the
fi
rst time and after the changing of
port and O-ring(s).
Store the housing in a robust, shock-proof
container during transportation; avoid
transporting with any equipment, such as a
camera, inside the housing.
Care must be taken when opening the
housing, as pressure may build up inside
the housing which increases the opening
force.
Do not leave the housing and the monitor
in direct sunlight for prolonged periods.
Defective products should be shipped to
our distributors for service, unauthorized
disassembling and/or modi
fi
cations
could result in malfunction or leakage.
Do not use lubricants from other brands
with the silicone rubber O-ring on this
housing, only use the lubricant provided by
NAUTICAM.
Discontinue use immediately should you
notice any leakage.
When travelling by air, do not travel with dome
port installed as this may lead to a pressure
difference between the atmosphere and
inside the housing.
This product is not intened for use by
children, or persons with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
are supervised and/or given instruction by
a responsible person concerning use of
the product to ensure that they can use it
safely.
1
3
5
7
9
11
4
6
8
10
2
Do not open the product in a wet or sandy
environment. Protect the interior from
moisture and debris in order to prevent
malfunction or leakage.
Do not store the product in an environment
of high humidity.
