13
1.
Disengage the saddle lock by
sliding it to the right as shown in
the diagram.
2.
Remove the camera saddle from
the housing.
3.
Tilt the LCD monitor of the
camera upwards*, then attach
the saddle to the camera by
tightening the screw to the tripod
socket of the camera.
4.
Make sure the ON/OFF switches of
both the camera and the housing
are in the “OFF” position.
5.
Mount the camera by sliding the
attached saddle along the rail in the
housing until it cannot go in any
further and the saddle lock moves
back to the engaged position.
1.
Disengage the camera saddle
lock by sliding it to the right.
