24
C
HANGING THE
V
IEWFINDER
In order that users can change to a preferred viewfinder easily, the 0.66X viewfinder which
comes with this housing is designed so that it can be removed and re-installed by following the
simple steps described below.
To remove the viewfinder:
1.
Remove the retainer O-ring of the
viewfinder inside the rear half of
the housing by making use of the
recess on the viewfinder.
2.
Gently push the viewfinder from
the inside of the housing.
Summary of Contents for NA-GX85
Page 1: ...1...
Page 22: ...22 4 Turn the port locking lever to the release position as shown 5 Lift housing cap...
Page 29: ...29...
