Nauticam NA-GX7, Instruction Manual

Page: 15 / 21

14
1. Disengage the red camera saddle
lock by pressing it inwards.
Remove the camera saddle from
the housing by sliding it outwards
2. Tilt the LCD monitor of the camera
upwards, then attach the saddle to
the camera by tightening the screw
to the tripod socket of the camera.
3. Lift the Mode dial/ON/OFF dial
upwards and turn it to the
side.
4. Install the camera by sliding the
attached saddle along the rail in
the housing until it cannot go in
any further.
*Make sure the Mode dial/
ON/OF dial do not block in the
way (step 3).