Prepar
15
P
REPARATION OF THE
H
OUSING
1.
1.
1.
1.
After verifying that the main O-ring is
in good condition, lightly coat it with the
lubricant provided.
2.
2.
2.
2.
Make sure the O-ring groove located
in the front part of the housing is free
from any foreign material; the groove
can be cleaned with the aid of a
microfiber cloth.
3.
3.
3.
3.
Place the main O-ring into the groove,
first at the corners, then the whole
perimeter.
4.
4.
4.
4.
Setting up the moisture alarm:
1.
Ensure that remove an insulation
film before install a battery.
Then install the battery provided
into the battery compartment on
the circuit board inside the
housing.
