14
2.
Disengage the red camera saddle
lock by pressing it inwards.
Remove the camera saddle from
the housing by sliding it outwards.
1.
Turn the locking lever on the tray
of the housing to the “open”
position as shown.
4.
Install the camera by sliding the
attached saddle along the rail in
the housing until it cannot go in
any further.
Note: If installing the camera with
lens and gear attached, first pull
out the zoom/focus knob and sit on
the shallower groove as shown.
3.
Tilt the LCD monitor of the
camera upwards, then attach the
saddle to the camera by
tightening the screw to the tripod
socket of the camera.
Summary of Contents for NA-A7II
Page 1: ...0...
Page 21: ...20 P N 25611 M14 Vacuum Valve P N 26302 Mini Flash Trigger for Sony...
Page 22: ...21...
