1 Confirm that the port adaptor is
unlocked, with the locking pin
pointing upwards as shown.
2 Align the "I" mark on the port adaptor
with the “O” mark on the port. Then
gently push the port adaptor towards
the port until it cannot go in any
further.
MOUNT PORT ADAPTOR TO PORT
Preparation of the product
1. After verifying that the sealing O-ring is in good condition, lightly coat it with the lubricant provided and
wipe away the excess.
2. Make sure the O-ring groove is free from any foreign material; the groove can be cleaned with the aid of
a microfiber cloth.
3. Carefully place the port O-ring into the groove, ensuring that it lays flat and inside the entire groove.
4. Inspect the O-ring again, make sure there is no foreign materials.
5. After installing the port, lift up the entire system and inspect where the housing back and port meet the
housing. There should be a thin, uniform gap with no extruded O-ring.
