background image

4

IMPORTANT INSTRUCTIONS

Water-tight test of the housing (without 

camera inside) along with EMWL before 

usage is recommended.

Do not point of the lens directly towards 

the sun.

Defective products should be shipped to 

our distributors for service. Do not attempt 

to disassemble and /or modify any part of 

the lens.

The housing setup should be positioned 

on the a stable and safe surface on land.

This product is not intened for use by children, 

or persons with reduced physical, sensory or 

mental capabilities, or lack of experience and 

knowledge, unless they are supervised and/

or given instruction by a responsible person 

concerning use of the product to ensure that 

they can use it safely.

Do not use any kind of abrasive solution to 

clean the glass surfaces.

Do not expose the housing in direct 

sunlight for a prolonged period.

Do not sealed the housing system when 

travelling by air.

1

3

5

7

9

11

4

6

8

10

2

Do not open the housing system in wet or 

sandy environment. Protect the housing 

and lenses from moisture and debris in 

order to prevent malfunction or leakage.

Prevent any sand or dust or water 

penetration inside the housing and in 

between lenses. Be extra careful when 

changing lens and inserting or removing 

the camera.

Do not jump in water carrying the housing 

setup. Always have the setup handed to 

you when you are in water.

Summary of Contents for EMWL

















Reviews: