Current as of 2018-10-23
---Continue from front page---
C
HANGING THE
M
OUNTING
R
ING
A M67 mounting ring is supplied for directly mounting MWL-1
on the flip holder.
Follow below instruction to exchange the Bayonet Mounting
Ring of MWL-1 to M67 Mounting Ring in order to
be
securely
Remove the 7x screws from the back of the lens.
Remove the bayonet mounting ring of MWL-1. Note that there
are 4x small black cylindrical positioning pins. All 4 pins should
be remain in the back of the lens
Locate the 4 small sockets of the M67 mounting ring. Align with
the positioning pins on the MWL-1 and place it on top.
Secure the mounting ring by tightening the 7x screws
Fastening the MWL-1 tightly on M67 flip holder or double flip
holder. Please refer to MWL-1 to adjusting the lens hood
position
Remark: All Nauticam product manual will be changed to e-manual in end of
2018. Please download corresponding product manuals on
website, or contact us for e-manuals.
