Update as of 2020-02-28
--- continued from front page ---
Place the locking ring on the bayonet converter, then fasten the
converter on the front of the housing with the fastening tool provided.
Remove the Olympus optical fiber connector from housing, then install
the optical fiber connector provided.
Align the positioning block on the bayonet converter with the slots on
the front of the housing.
Place the locking ring on the bayonet converter, then fasten the
converter on the front of the housing with the fastening tool provided.
*Attention: Before installing WWL-C into the housing, pre-install the
optical fiber cables as shown in case of using strobes
.
Example: WWL-C with bayonet Converter on the NA-TG5 housing.
--- continue on next page ---
I
NSTALL
T
O
O
LYMPUS
PT-058/059
