Current as of 2020-03-18
3.
Align the port mounting indicates of the N85 to N120
50mm port adaptor II and the housing
....
Then, gently push the adaptor into the port opening of the
housing, until it cannot go in any further.
M
OUNT THE
L
ENS
1.
Lock the adaptor into place by turning the port locking lever
of the housing to the inward position. To ensure that the
adaptor is securely mounted, confirm that the green line on
the safety button of the port locking lever is visible.
2.
Mount the lens (with gears attached) on the camera.
Make sure that the zoom/focus knob on the adaptor is at
its most outward position before mounting/ dismounting
the lens. The knob should be left at this.
INSTALL
DOME
PORT
1.
Lift the port lock/ release latch on the other side of the
adaptor. Then Press and hold the RED port release safety
button, turn the port lock/release latch clockwise until it
stops.
2.
Align the "I" mark on the adaptor with the WHITE dot on the
port. Gently push the port towards the adaptor until it
cannot go in any further.
3.
Turn the port count clockwise until the white dot on the
adaptor aligns with the white dot on the port.
