3
IMPORTANT INSTRUCTIONS
Water-tight test of the housing (without
camera inside) along with the view
fi
nder
before usage is recommended.
Do not expose the housing setup in direct
sunlight for a prolonged period.
Defective products should be shipped to
our distributors for service. Do not attempt
to disassemble and /or modify any part of
the lens.
The housing setup should be positioned
on the a stable and safe surface on land.
This product is not intened for use by children,
or persons with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they are supervised and/
or given instruction by a responsible person
concerning use of the product to ensure that
they can use it safely.
Do not use any kind of abrasive solution to
clean the glass surfaces.
Use only Nauticam lubricant on silicone
rubber O-ring. Do not stretch any O-rings
excessively. Only remove it using Nauticam
O-ring remover.
Do not sealed the housing system when
travelling by air.
1
3
5
7
9
11
4
6
8
1
0
2
Do not open the housing system in wet or
sandy environment. Protect the housing
and lenses from moisture and debris in
order to prevent malfunction or leakage.
Prevent any sand or dust or water
penetration inside the housing and in
between lenses. Be extra careful when
changing lens and inserting or removing
the camera.
Do not jump in water carrying the housing
setup. Always have the setup handed to
you when you are in water.
