2
Batteries Installation:
This product can only used with CR 2450 batteries. Never use other kinds of batteries. It is recommended
to use Panasonic CR2450 batteries to ensure quality and durability.
1.
Make sure the On/Off switch is in the OFF
position.
2.
Remove the batteries compartment cover
by sliding it outwards.
3.
Install the batteries as shown. Please note
that the "-" sign on the battery holder
denotes the side of the battery facing
down.
4.
Close the battery cover and then switch
the trigger unit on. The indicator will turn
green.
Indicator
Status of flash trigger
Green light
Start up.
Flashing
Green light
(1 flash/sec)
Ready to use, normal
operation.
Flashing
Red light
(1 flash/sec)
Low battery warning,
replace batteries.
Press
Slide
All manuals and user guides at all-guides.com
