Current as of 2019-04-23
4.
Insert the
Nikkor 70-180 focus gear
on the focus c-ring,
then gently push down the gear towards the bottom
until it cannot go any further as zoom gear
5.
Insert the support ring as shown and lace it over the
lens.
To remove the gear set, reverse the above steps.
The tightness between the Nauticam Cinema System
Gear Set for Micro-Nikkor 70-180 and the lens can
be adjusted by removing or adding rubber grips on
either sides of the c-rings, spare rubber grips are
included in the package.
Remark: All Nauticam product manual will be changed to e-manual in end of
2018. Please download corresponding product manuals on
Nauticam.com
website, or contact us for e-manuals.
