Nautel XR6, Operation And Maintenance Manual

Page: 45 / 83

XR6/XR3 Operations and Maintenance Manual Operating the transmitter
Page 2-20 Issue 3.1 2013-03-14
Adjusting screen contrast
The XR6/XR3’s LCD screen (used to display the GUI) is set by default to a contrast suitable for
most locations. The XR6/XR3 also adjusts the contrast setting automatically to compensate for
changes in temperature. However, depending on your preferences and light conditions, you may wish
to increase or decrease the contrast manually using the
LCD Contrast Setting page . To view the
LCD
Contrast Setting
page, select
Settings
from the Main Menu , then
LCD Contrast Setting
from the
General Settings menu .
Figure 2.14: LCD Contrast Setting page
To change the contrast, press the
Edit
button and then use the
Up
and
Down
buttons to increase or
decrease the setting.
Changing hardware settings
You can set thresholds, calibrate digital and analog meters, and restore factory settings using the
Hardware Settings menu . To view the
Hardware Settings
menu, select
Settings
from the Main
Menu , then
Hardware Settings
from the General Settings menu . The Hardware Settings Warning
page appears. Press
Continue
to proceed to the Hardware Settings menu - see page 2-21 .
Figure 2.15: Hardware Settings Warning page
10:18 0.00kW M-1 B+1 PM:A Man Ex:A Man
Contrast Level (0-255): 213
Press EDIT to modify the value.
Edit Back
10:18 0.00kW M-1 B+1 PM:A Man Ex:A Man
Contrast Level (0-255): 213
Press EDIT to modify the value.
Edit Back
10:18 0.00kW M-1 B+1 PM:A Man Ex:A Man
Continue Back
WARNING! – FACTORY SETTINGS
Modifying these settings can affect
System Operation.
Press CONTINUE to proceed.
10:18 0.00kW M-1 B+1 PM:A Man Ex:A Man
Continue Back
WARNING! – FACTORY SETTINGS
Modifying these settings can affect
System Operation.
Press CONTINUE to proceed.