![Nautel XR12 Operation And Maintenance Manual Download Page 43](http://html2.mh-extra.com/html/nautel/xr12/xr12_operation-and-maintenance-manual_3622936043.webp)
XR12 Operations and Maintenance Manual
Operating the transmitter
Page 2-18
Issue 3.1 2013-03-14
30-Day Drift Estimation
1. Set the XR12’s clock (see
“Setting the clock” on page 2-16
) according to a selected
independent time standard.
2. After 30 days, compare the XR12’s clock time to the same independent time standard. Note
the time difference.
3. In the
Calibrate Clock
page, adjust the Current RTC Calibration value until the Delta 30-day
Correction time is as close as possible to the difference noted in
. NOTE: If the
XR12’s clock gained time on the standard, the Delta 30-day Correction value should be
negative; If the XR12’s clock lost time on the standard, the Delta 30-day Correction value
should be positive.
4. Press the
Save
button to store the calibration value.
5. Reset the XR12’s clock according to the time standard.
6. The calibration is complete.
RTC Frequency Measurement
1. Connect a frequency counter, capable of measuring 512 Hz within 0.001 Hz, to a nominal
512 Hz, 5 V CMOS square-wave on TP51 of the control display PWB (A1A1). Note the
measured frequency.
2. In the
Calibrate Clock
page, adjust the Current RTC Calibration value until the Estimated
FT Frequency value is as close as possible to the measured frequency in
3. Press the
Save
button to store the calibration value.
4. Reset the XR12’s clock (see
“Setting the clock” on page 2-16
) according to a selected
independent time standard.
5. The calibration is complete.
Summary of Contents for XR12
