Nautel VX150, Operation & Maintenance Manual

Page: 149 / 179

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 2.2.132 VERSION 1.0 2022-12-08
Remote Outputs . When you select Remote Inputs from the Remote I/O screen, you can edit
parameters related to a Remote Output. See Figure 2.2.114 ).
Nautel sets six (6) remote output defaults before shipping. See the VX150 to VX2 Installation Manual
for details.
Use the Front Panel rotary knob to select the desired remote output (1 through 6) from the list. Each
screen shows the current remote output parameter (e.g., RF On/Off), as well as the trigger (e.g., Active
High) and current state (e.g., on/off) of the corresponding output pin. Use the Front Panel rotary knob to
enter the Trigger and/or State for the selected output. Press the Back button to discard any changes.
See the remote AUI section, Remote I/O, on page 2.2.71 , for a detailed description of the parameter
setting options.
Figure 2.2.114: Remote Outputs
Analog Outputs. When you select Analog Outputs from the Remote I/O screen, you can view and
configure the forward and reflected power samples of the transmitter. See Figure 2.2.115 on page
2.2.133 ).
Nautel sets the analog Sample Full Scale setting defaults at 5.0 V prior to shipping, with a range of 1.0
to 10.0 V. Use the Front Panel rotary knob to edit the Sample Full Scale setting. Each screen shows the
analog output parameter, Forward Power or Reflected Power, as well as the meter reading (actual and
full-scale) and the sample voltages (actual and full-scale). Press the Back button to return to the
previous menu. See the VX150 to VX2 Installation Manual for details.
See the remote AUI section, Remote I/O, on page 2.2.71 , for more information on setting the Sample Full
Scale value.