Nautel VX150, Operation & Maintenance Manual

Page: 130 / 179

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 1.0 2022-12-08 PAGE 2.2.113
Use the Front Panel rotary knob to enable RDS, then press the Front Panel rotary knob to save the
change. See
Figure 2.2.85 . Once RDS is enabled, two sub-menu screens are activated that allow the
user to enable/edit other features. See Figure 2.2.86 . Use the Front Panel rotary knob to scroll through
the desired RDS settings, then press the Front Panel rotary knob to enable editing of the parameter.
Within any of the editing screens, use the Front Panel rotary knob to edit or toggle a parameter value.
When complete, press the Front Panel rotary knob to save the change. Press the Back button to discard
any changes and return to the previous menu.
Figure 2.2.85: RDS Enabled
Figure 2.2.86: RDS Enabled - Sub-menus
Use the Front Panel rotary knob to select the desired RDS Data Source option and then press the Front
Panel rotary knob to enter the associated sub-menu, noting the minimum and maximum limitations
indicated at the bottom of the display (if applicable) for:
• Internal RDS (see Figure 2.2.85 on page 2.2.113 ), set the RDS Injection Level (allowable range
is 0 to 10%).