Nautel VS300, Operation And Maintenance Manual

Page: 141 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-126 Issue 8.0 2016-03-01
User Settings - AUI
You can configure network settings, configure email and notification settings, configure SNMP
settings, capture critical transmitter data, enable the use of an external 10 MHz reference, set the
system time and date, configure the NTP server (as applicable), and set the station call sign/ID, and
set low audio thresholds using the
User Settings
menu (see Figure 2.107 ). To view the
User Settings
menu, select
User Settings
from the
Menu
options. Click
X
in the upper, right corner to close this
page and return to the home page.
Figure 2.107: User Settings Menu (Network Setup Page Shown)
Via the User Settings menu, the following configurations are possible:
•
Network Setup:
The AUI allows editing of most network parameters (can edit port number
through AUI). You can edit using the remote AUI if remote control is enabled, or locally,
using the front panel UI (see
Network Setup on page 2-128 ).
•
Email Configuration:
Allows configuration of email parameters (e.g., server name, port
number, etc.) (see Email Configuration on page 2-132 ).
Note:
Unless otherwise noted, the following functions are only available via remote connection to the
AUI.