Nautel NX50, Operation And Maintenance Manual, Page: 135 / 166

NX50 Operations and Maintenance Manual Operating the transmitter
Issue 3.3 2016-02-08 Page 2-117
Transmitter Type
The
Transmitter Type
page (see Figure 2.89 ) displays the selected transmitter type. The selection is
based on the power capacity of the transmitter and is set at the factory during testing.
Figure 2.89: Factory Settings - Transmitter Type
WARNING: Factory settings are established at the factory and should not require any adjustment.
These settings affect critical system protections. Making changes to these settings may void your
warranty. Contact Nautel before making changes.
For future reference, record a parameter value before and after making a change.