Nautel NX5 AM, Operation & Maintenance Manual

Page: 80 / 220

NX5 OPERATION & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.60 VERSION 0.1 2015-08-01
Loading Presets
When you enter the
Presets
page, the
Current Settings
of the transmitter are displayed. See Editing,
Creating and Deleting Presets, on page 3.2.59 for more information on
Current Settings
. If you do not
wish to change the current operational state of the transmitter, use the
Load
button on the left side of
the
Presets
page to display a window containing a list of other presets. Select the desired preset and
click the
Load
button to view or enable editing of the preset. Click the
Cancel
button to close this
window.
Select the desired preset and click the
Load
button to view or enable editing of the preset.
Activating Presets
In the Transmitter block in the remote AUI’s top banner, click the bar that contains the active preset
name and the drop-down arrow (see
Figure 3.2.47 ). The
Activate Preset
window will appear, which
contains a list of all saved presets. Click and highlight the desired preset and click the
Activate
button
to enable the preset as the transmitter’s active preset. Click the
Cancel
button to close this window.
Figure 3.2.47: Activating Presets
CLICK HERE TO
DISPLAY PRESET
SELECTION
OPTIONS