Nautel NV7.5, Operation And Maintenance Manual

Page: 138 / 183

NV10/NV7.5 Operations and Maintenance Manual Operating the transmitter
Page 2-106 Issue 3.4 2016-08-03
External 10MHz
This setting (see Figure 2.72 ) allows the user to mask the associated 10MHz alarm from
appearing on the
Status
page if it isn't being used
.
If an external 10MHz source is being used,
Yes
should be selected as this ensures that an alarm will be activated on the
Status
page should
the external signal be lost. If an external 10MHz source is not being used, the default
No
setting
should not be changed. This will ensure that no alarm will be displayed on the Status page
despite the presence of the external 10MHz signal.
Figure 2.72: User Settings - External 10MHz (Default shown)
Note:
The exciter will automatically use an external 10MHz reference signal if
connected, no matter the state of this parameter.