Nautel NV7.5, Operation And Maintenance Manual

Page: 135 / 183

NV10/NV7.5 Operations and Maintenance Manual Operating the transmitter
Issue 3.4 2016-08-03 Page 2-103
SNMP configuration
The
SNMP
configuration page provides a user with a means to configure the
SNMP
agent and
the associated traps (see Figure 2.69 ).
Figure 2.69: User Settings - SNMP Configuration - Agent Tab
Agent Settings
Using the
Agent
tab you can configure the
SNMP
agent as follows:
1. Enter the five fields, noting the following:
•
Agent Port:
Enter the UDP port where the SNMP agent checks for requests. The
default setting is 161. If your transmitter is behind a firewall, you must open this
port to use SNMP.
•
Read Community:
Enter the password for the SNMP client application to allow
acquisition of channel values. Provide confirmation of this password by re-entering
it in the
Confirm
field.
•
Write Community:
Enter the password for the SNMP client application to allow
changing of channel values. Provide confirmation of this password by re-entering it
in the
Confirm
field.
Select the
Enable Traps
check box (

) to allow the SNMP agent to send trap notifications.
Enter the two additional fields as follows: