Nautel NV7.5, Operation And Maintenance Manual

Page: 154 / 183

NV10/NV7.5 Operations and Maintenance Manual Operating the transmitter
Page 2-122 Issue 3.4 2016-08-03
• IPA Voltage
• Average IPA Output Power
• Controller Temperature
The values associated with each of these fixed meters (cannot be changed to another meter) are
of a linear nature so that changes made to the
Full Scale Voltage
field (allowable range is 1- 6 V,
defaulted to 6 V) will be reflected in the other fields according to the following equation:
(Current Value/Full Scale Value) x Full Scale Voltage = Current Voltage
Press
Apply
to activate changes. Press
Cancel
to discard changes.
Figure 2.83: Analog Outputs Page
Note:
The Current Voltage reading reflects the value that can be measured at the
associated remote analog output pin for the given Current Value. See the NV series
transmitter Pre-installation Manual for actual remote analog output pin
assignments.