Nautel NV30LT-N, Operation & Maintenance Manual

Page: 52 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.34 VERSION 0.1 2015-03-01
Viewing Instrument Panels
Each instrument panel has a menu bar that may be different from other panels (see Figure 3.2.20 ).
Figure 3.2.20: Instrument Panel Menus
Instrument Panel Procedures
Procedure to view instrument readings on the panel:
 To display a cursor in the panel, touch the screen where you want the cursor (see Figure 3.2.21 on
page 3.2.35 ). The cursor position is noted in the upper, right-hand corner of the panel (e.g.,
frequency and amplitude for the spectrum analyzer). Touch in other areas of the instrument to
provide a coarse adjustment of the cursor position.
 To make fine adjustments, use the backward and forward buttons (see Figure 3.2.20 ).
 To enlarge/reduce the instrument panel, use the maximize/minimize buttons. Some instrument
displays show more information when maximized (
e.g.,
EQ Impulse Response
(see
Figure 3.2.22 on
page 3.2.35
)
.
 To display additional settings in the
Spectrum Analyzer
panel, touch the “cog” button (see
Figure 3.2.20 ). Displays include resolution bandwidth, span, averaging rate and the actual
measurement source (transmitter output, audio analyzer, etc.) that is being displayed. Touch the
“peak” button (see
Figure 3.2.20 ) to place the cursor on the next successive peak in the spectrum.
Each panel has a tool bar at the top of the display
Backward one step
Forward one step
Maximize / Minimize
Cog (more settings)
Exit
Peak (jumps cursor to
the next peak)