Nautel NV10LT, Installation Manual

Page: 21 / 70

NV10LT/NV7.5LT INSTALLATION MANUAL INSTALLING OPTIONS
VERSION 5.0 2021-03-01 PAGE 2.3.3
Installing the UPS Interface
The NV10LT/NV7.5LT is factory configured with no UPS interfacing ability. You can install a UPS
interface assembly, which allows you to interface with a user-provided UPS that can act as a backup
power source for the transmitter’s low voltage power supplies in the event of an ac power failure.
1. Obtain the “QG12007* - NVLT UPS Interface Upgrade Quick Guide ” (see Figure 2.3.2 ) that was
provided with the UPS Interface Upgrade Kit.
2. Complete the procedure outlined in the “NVLT UPS Interface Upgrade Quick Guide”.
Figure 2.3.2: UPS Interface Upgrade Quick Guide (QG12007*)
3. Do not re-install the rear panels at this time.
WARNING! ENSURE THAT AC POWER IS NOT BEING APPLIED TO THE
TRANSMITTER DURING THIS PROCEDURE.
SHOWN FOR REFERENCE ONLY