Nautel GV5, Operation & Maintenance Manual, Page: 219 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.202 VERSION 0.2 2014-07-23
Selecting an Orban Audio Processor Preset
Select an Orban audio processor preset using either the AUI (see Selecting an Orban Preset - using the
AUI - see page 3.2.202 ) or the controller UI (see Selecting an Orban Preset - using the Controller UI ) as
follows:
NOTE
: Selecting an Orban preset via the AUI will cause the controller UI to also reflect the change, and
vice versa. To create a new Orban Audio Processor Preset, see Managing an Orban Audio Processor
Preset, on page 3.2.204 .
Selecting an Orban Preset - using the AUI
1. From the AUI's
Main Menu -> Presets
page, press the
Other Settings
tab (see Figure 3.2.172 ).
2. From the
Orban Preset
drop-down list, select the desired Orban preset (e.g., ROCK-LOUD, etc).
Refer to the Orban Optimod 5500 manual for detailed information on the factory programmed
presets available. Press
Save
to store the change. To create a new Orban preset, see Managing an
Orban Audio Processor Preset, on page 3.2.204 .
Figure 3.2.172: Selecting an Orban Preset - Remote AUI