Nautel GV5, Operation & Maintenance Manual, Page: 115 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.98 VERSION 0.2 2014-07-23
Resetting Alarms
You can attempt to reset any latching transmitter alarms that are holding the transmitter in an “off-air”
state using the remote AUI’s
Reset button (see Resetting Alarms, on page 3.2.100 ) or using the
controller’s UI display (see Resetting Alarms - Using the Controller UI ).
Resetting Alarms - Using the Controller UI
When you select Reset Alarms from the Main Menu , you can attempt to reset latched protection
circuits in the GV5/GV3.5 (see Figure 3.2.83 ). If the alarm condition has been cleared, the alarm
indication on the View Alarms screen should disappear.
Figure 3.2.83: Reset Alarms Screen
Use the up and down buttons to toggle between
Reset Alarms
and
Cancel
. Press the accept
(checkmark) button to save the change. Press the cancel (
X
) button to return to the previous menu.