Nautel GV3.5, Operation & Maintenance Manual, Page: 51 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.34 VERSION 0.2 2014-07-23
Viewing Log Statistics
You can view statistical information on the events being displayed by pressing the
Statistics
button in
the log manager (see Figure 3.2.19 ).
NOTE
:
Only events subject to the filtering parameters are displayed on the Statistics screen.
The
Statistics
screen displays the events that occurred within the filtered period as well as the time and
date of the earliest and latest event occurrence for each. You can move through the list using the scroll
bar (if applicable) or the up and down arrow buttons to the right of the scroll bar. Press
OK
or
Cancel
to
close this window. The columns in the display indicate specific information about the events:
 Device - refers to the device (Controller, Exciter, Rack, RF Module) associated with the alarm.
 Event - describes the alarm (e.g., Local/Remote switch)
 Severity - identifies the seriousness of the alarm (see Viewing the Legend, on page 3.2.35 ).
 # Events - reveals the number of occurrences for that event during the filtered period.
 Earliest - refers to the first time of an alarm event, within the filtered period.
 Latest - refers to the latest time of an alarm event, within the filtered period. If an alarm has only
one occurrence (i.e., # Events column is 1), then the time in the “Earliest” column will be the same
as the time in the “Latest” column. If an alarm has more than one occurrence (e.g., # Events
column is 4), then the “Earliest” column reveals the time of the first alarm (back in time), while the
“Latest” column reveals the time of the last alarm (closest to the present).
Figure 3.2.19: Log Manager - Statistics
Selects item at top
of current page
Selects next higher
page items
Scrolls up one item
Scrolls down one
item
Selects next lower
page items
Selects item at
bottom of current
page