Nautel GV3.5, Operation & Maintenance Manual, Page: 215 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.198 VERSION 0.2 2014-07-23
Orban Hardware Configuration - using the AUI
1. Navigate to the AUI's
System Settings -> Hardware Configuration
page (see Figure 3.2.169 ).
2. Press or click on the drop arrow in the
Audio Processor
field. Select
Orban Inside
to enable the
Orban audio processor for use (selecting
None
disables it). Press or click the Apply button to save
the change. Press or click Cancel to discard changes.
3. Reboot the AUI in the
System Settings -> Reset
page. This will ensure the transmitter properly
detects the Orban Inside card upon recovery.
Figure 3.2.169: Configuring the Transmitter - AUI System Settings -> Hardware Configuration page