Nautel GV3.5, Operation & Maintenance Manual, Page: 193 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.176 VERSION 0.2 2014-07-23
Remote Outputs - AUI
Using the
Remote Outputs
tab (see Figure 3.2.151 on page 3.2.176 , you can configure up to 16 digital
outputs that indicate either the presence of various alarms or the status of operator controlled circuits.
Nautel sets digital output defaults prior to shipping. See the GV5/GV3.5 Pre-installation Manual for
details.
Figure 3.2.151: Remote I/O Page - Remote Outputs tab selected
Select the desired digital output (1 through 16) from the list. The
Channel
and
Control
settings for the
selected output, as well as the current logic level (1 or 0), are displayed on the right-hand side of the
page. You can define the
Channel
and
Control
settings as follows: