Nautel GV3.5, Operation & Maintenance Manual, Page: 190 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.173
Configuring Remote Inputs and Outputs
You can configure your remote input/output interface for the transmitter using the AUI (see Remote I/O
Settings - using the AUI ) or using the controller UI (see Remote I/O Settings - using the Controller UI, on
page 3.2.179 ).
Refer also to the GV5/GV3.5 Pre-installation Manual for information on remote inputs and outputs and
their factory default settings.
Remote I/O Settings - using the AUI
To view the Remote I/O page (see Figure 3.2.149 ), select Remote I/O from the Menu options. Press X
in the upper, right corner to close this page and return to the Home page.
Figure 3.2.149: Remote I/O Page - Remote Inputs tab selected
Select the Remote Inputs tab (see Digital I/O Inputs - AUI, on page 3.2.173 ) or Remote Outputs tab
(see Digital I/O Outputs - AUI, on page 3.2.175 ) to view or edit detail on the digital inputs or outputs.