Nautel Exporter Plus, Technical Instruction Manual, Page: 178 / 186

Exporter Plus Technical Instruction Manual Troubleshooting
Page 10-12 Issue 1.0 2020-05-05
Parts information
For the purposes of identifying parts and possibly ordering replacements, the Exporter Plus’
internal assemblies are identified in Table 10.3 and Figure 10.9 on page 10-13 . The table
provides the reference designation, a description, and the Nautel part number for each item.
The figure shows the location of the major components.
Table 10.3: Exporter Plus Parts List
Reference
Designation
Description Nautel Part #
A1 Embedded Exporter PCI Card NAPE80D
A2 Embedded Exporter Interface PWB NAPI110
B1 Not Used -
B2 Fan, DC, 12V, 35mm, 7CFM ZA51
S1 Switch, Rocker, SPST, 15A SD69
S2 Switch, MOM, Rocker, SPST, 15A SD68
U1 SBC, PICMAG 1.0, ATOM D425 UA171
U2 Backplane PWB Mod 198-5526
U3 Power Supply Mod 198-5518-06
U4 Display, 20x4 LCD, 3.3 - 5V, -20/+70 UW146
U5 Connector, Coupler, RJ45, Feed-Thru, Shielded JA76
U6 Connector, Coupler, RJ45, Feed-Thru, Shielded JA76
U7 Not Used -
U8 Not Used -
U9 Memory, 2G, DDR3, 1333MHz, SODIMM UX145
U10 Not Used -
U11 Not Used -
U12 Memory, Compact Flash Card, 8GB 207-8707-01
W1 Cable, Cat5e, 1’, Molded UA73
W2 Cable, Cat5e, 1’, Molded UA73
W4 Cable, USB Type A M. Panelmount F, 1’ JA85
W5 Not Used -
W7 GPS Antenna Cable Assembly 198-5508