Nautel Exporter Plus, Technical Instruction Manual, Page: 174 / 186

Exporter Plus Technical Instruction Manual Troubleshooting
Page 10-8 Issue 1.0 2020-05-05
LED indications
There are four LEDs on the left-hand side of the LCD display that provide operational status
for the Exporter Plus (see Figure 10.6 ). The LEDs can glow green, yellow or red. Typically,
green indicates normal operation, yellow indicates a warning, and red indicates a fault or error.
Figure 10.6: Front Panel LEDs
Table 10.1 on page 10-9 lists possible root causes for LEDs that are in a warning (yellow) or
alarm (red) condition).
Note: An LED will flash for ten seconds when it changes state.
LEDs