BEFORE ANY MANIPULATION:
• UNPLUG THE POWER CHARGER FROM THE MAINS.
• CHECK THAT ALL ELECTRICAL ELEMENTS ARE CONNECTED TO EACH OTHER.
DAILY MAINTENANCE / BETWEEN EACH PATIENT:
• Clean with a surface product.
• Clean the cylinder casing and cables, if they have been splashed with fluids
bodily infections, including urine.
• Clean and disinfect all parts in direct contact with the patient (handles, foam)
COMPLETE CLEANING AND DISINFECTION:
• Clean the entire chassis of the appliance with a pre-disinfectant detergent.
• Clean the engine with a cloth slightly dampened with a pre-disinfectant detergent solution
• Never clean the appliance, especially the electrical system, with a high-pressure cleaner, a water
hose or similar.
• Disinfect the appliance (by spraying with surface disinfectant or by misting of disinfectant solution for
example), please respect the contact times of the product used.
MAINTENANCE AFTER CLEANING AND DISINFECTION :
• Check the appliance for visible damage.
• Check that no parts are missing.
• Check that the wheels are working properly and that there is no material staining their bearing (hair,
scraps of carpet, etc.).
• Check that the controls are working properly as well as that the remote control is connected, and
of the cylinder on the battery pack.
• Check the integrity of the electrical cables (cylinder and remote control)
CAREFUL:
• THE DETERGENTS USED MUST HAVE A NEUTRAL PH.
• AVOID ABRASIVE PRODUCTS AND SOLVENT, THEY COULD DAMAGE THE SURFACE
FINISH OF THE DEVICE.
If you notice a fault, contact the after sales service:
Stand Up Lifts & Hoists
Phone : 04 66 71 71 80
Fax: 04 66 71 71 81
Mail: [email protected]
Cleaning and maintenance
51
ENGLISH