natus Otometrics Madsen Alpha OAE+ User Manual Download

Page: 31 / 86

Child Mode

is not activated, a bar chart is displayed. See the

Test details

table

below for a description of the bar chart and other data displayed.

•

If needed, press the

Stop

button to stop the test. The test will be saved as an

incomplete test.

See

DPOAE test results

►

for a description of the frequencies tested and the PASS/REFER criteria for each of the vari-

ous DPOAE test protocols.

Test details

Shows which ear is being tested.

Bar chart

Noise

Excessive Noise
Noise is above 41 dB SPL for more than 50% of the test dur-
ation for the frequency.

Registered DPOAE response: Frequency passed

DPOAE frequency being tested or referred

The height of the bars represents the noise/response amplitude.

The test frequencies are shown below the bar chart.

DPOAE

Response at current test frequency.

Noise

Current noise level. Make sure the noise level is as low as pos-
sible. The noise bar turns red when the noise level is over 41 dB
SPL.

5.3.4

DPOAE test results

In Child Mode, when a test is completed, the Reward screen is displayed, regardless of the test result. This screen shows
an animated bunch of balloons floating up to the sky. The outcome of the test is then displayed on the

Test result

screen.

Otometrics - MADSEN Alpha OAE+

5 Testing with Alpha OAE+

Summary of Contents for Otometrics Madsen Alpha OAE+























































































Search results

Summary of Contents for Otometrics Madsen Alpha OAE+

Reviews:

Related manuals for Otometrics Madsen Alpha OAE+

Brands by name

Popular brands

natus Otometrics Madsen Alpha OAE+, User Manual

Search results

Summary of Contents for Otometrics Madsen Alpha OAE+

Reviews:

Related manuals for Otometrics Madsen Alpha OAE+

Brands by name

Popular brands