natus OLYMPIC SMART SCALE 50, Instruction Manual

Page: 17 / 64

OLYMPIC SMART SCALE Model 50/51 Instruction Manual 2-5
Testing the Device
Testing the Device
Perform the test procedure to ensure the Smart Scale is working properly after
performing assembly and service procedures.
Required Items:
„
Calibration weights (part no. 56357)
To test the Smart Scale:
1
Press and hold
KG/LB
while pressing
ON/OFF
.
2
Verify that all lights illuminate.
3
Place the calibration weights on the scale, then confirm that the correct
weight displays.
4
Press
ON/OFF
to turn off the scale.
NOTE
#
The charging signal only illuminates when the scale is plugged into a functioning
electrical outlet.
NOTE
#
If the device does not operate as expected, see Troubleshooting on page 5-1.