Nicolet EDX
2-24
January 30, 2020
Powering the system
Turning the system on
When you switch on the main power, the system displays several startup and
diagnostic messages on the screen.
Turning on a Desktop system
For the first time you switch on the system power, switch the components on in
the following order.
1. Isolation Transformer
2. Monitor
3. Processor (Computer)
4. Base Unit
Turning on a Portable system
The first time you switch on system power, switch the components on in the
following order:
1. Base Unit
2. Laptop Computer
Turning the printer on
and off
Press the printer
Power
button to turn power on. Because the printer power is
controlled by the isolation power supply, you can leave this power switch on.
For proper isolation while the patient is connected to the
system, only connect a battery powered or independently isolated printer to
the system. Do not charge the printer’s battery or operate the printer from a
wall outlet when the system is connected to the patient.
Summary of Contents for Nicolet Viking EDX
