MADSEN Alpha OAE+ Screener User Manual
49
Appendix 1.
Standards and Safety
Appendix 1.1
Warranty
For product warranty information, please see
Appendix 1.2
Repair, after-sales service and regular checks
If Alpha OAE+ is found to be defective or in some way varies from the manufacturer's specifications, an authorized dealer will repair, replace,
or re-calibrate the instrument at no cost to the purchaser while Alpha OAE+ is within the warranty period.
Warning: Service and repair of electro-medical equipment should only be carried out by the equipment manufacturer or by authorized
representatives.
The manufacturer reserves the right to disclaim all responsibility for the operation safety, reliability, and performance of equipment serviced
or repaired by other parties.
Following repair, a qualified electronics engineer should verify the safety of all equipment.
Calibration should be performed annually by suitably qualified personnel using the appropriate equipment.
Appendix 1.3
Declaration
All devices of the type Alpha OAE+ should be checked and calibrated annually through a service center authorized by the manufacturer.
Appendix 1.4
Responsibility of the manufacturer
Caution: All assembly operations, extensions, re-adjustments, modifications, or repairs are carried out by the equipment manufacturer
or personnel authorized by the manufacturer.
The manufacturer is to be considered responsible for effects on safety, reliability, and performance of the equipment only if:
The electrical installation to which the equipment is connected complies with EN/IEC requirements.
The equipment is used in accordance with the instructions for use.
The manufacturer reserves the right to disclaim all responsibility for the operating safety, reliability, and performance of equipment serviced
or repaired by other parties.
