ErgoJust Cart Installation Instructions
3-14
July 14, 2016
3. Verify the input voltage printed on the ISO or UPS’s label is correct for the voltage source that
will be used to power the ISO or UPS (Figure 3).
Figure 3.
Removing the cable channel cover
The Video Camera, IR Light and Microphone cables feed through the video pole, which may
require removing the cable channel cover to access the cables.
1. Unscrew the cable channel mounting knob (Figure 1) and set the cable channel cover aside.
2. Replace and secure the cable channel cover when finished.
Figure 1: Removing the cable channel cover.
