https://www.naturewater.eu
Item 51101–51106, 51116, 51118
Page 3
03 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Inlet
(½″, ¾″, 1″)
Inlet
(½″, ¾″, 1″)
1.
The filter system is delivered with
5
μ sediment filter inserts,
which reliably remove sand, rust,
and algae as well as other floating particles from the water. – The
second step of the filter,
consisting of activated carbon granules cartridges, cleans the drinking water from ozone, pesti-
cides, rust, calcium oxide particles, chlorine, and lowers the concentration of heavy metals such
as lead and copper. The cartridge is used additionally to the activated carbon block filter candle.
– The
third filtering step,
consisting of an activated carbon block filter cartridge, cleans the
drinking water from ozone, pesticides, rust, calcium oxide particles, and chlorine, and reduces
the concentration of heavy metals such as lead and copper.
2.
The different connections for the inlet and outlet can be chosen by the customer.
3.
Open the casing and remove the filter cartridge. Remove the wrapping on the inside of the
cartridge. Then place the filter cartridge back into the casing and close it again.
4.
Check the connection between this product and everything connected to it.
5.
Connect the feed to the tap and ensure that its positioning is secure.
6.
Open the tap. The water will be redirected from the pipe through the filter system from where it
will flow out of the opening valve.
7.
The used water filter inserts and cartridges need to be exchanged according to the water quality
in regular intervals. The sediment and activated carbon filters cannot be washed out and need
to be replaced approximately every 6
months.
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction
manual require the written permission of WilTec Wildanger Technik GmbH.
